News

Plastic, in future

In 2023, domestic and foreign policies on plastic pollution prevention and control have become more stringent, and plastic restriction measures have been upgraded.

Principle of single screw extruder and its application in the plastic production

Key points of twin-screw extruder in compounding biodegradable polymer

Because biodegradable plastics are a rapidly developing industry,there are often new ideas, new or improved raw material and additives. It is much easier to improvement on the original twin-screw extruder, such as

Principle and application of co-rotating twin-screw extruder

Co-rotating twin-screw extruder is a kind of extrusion processing equipment widely used in plastics, rubber, food, medicine and other industries. Compared with single screw extruder, twin-screw extruder has higher production efficiency and better product quality.

Cameroon Customer Visity JORBIN MACHINERY

On 4th Sep, Mr.Arsene Ngninkeu from The Republic of Cameroon visity jorbin factory and check the plastic twin screw extrusion granulator machine.

Instroduction to several important principles of plastic extrusion

Instroduction to several important principles of plastic extrusion

Maintenance of the gearbox on the extruder

The maintenance of the most important part of the extruder is of course the gearbox, because of its high value and long delivery period. There are many steps and process to maintain it.

Indian customer visity JORBIN Machinery

On 23th, Mr.Swaraj from TrashCon in India visity jorbin factory and check the laminated food packing bags, films recycling granulator machine.

Ecuador customer visity JORBIN Machinery

From 26th to 29th April, Ecuador customer visity jorbin factory and check the film squeeizer machine which they bought.

Customers from Russian

Customers from the Russian purchased plastic film recycling washing machine and granulaiton machine from JORBIN Machinery.

How to solve the black spots in pellets during plastic granulation process

The problem of black spots in pellets during the granulation extrusion process is a common failure phenomenon, especially on colored and light-colored products.

Causes and solutions of extruder vacuum port leakage

During the extrusion process of the plastic recycling granulator, it is necessary to discharge the gas from the melt.If these gases are not discharged, defects such as pores and bubbles may appear on the surface or inside of the pellets,which will seriously affect the physical, mechanical, chemical and electrical properties of the final product.